Spa Marvel® Directions

Spa Marvel Directions

A 3 minute video by Tim Rodger, owner of Spa Marvel Company, explaining how Spa Marvel works.

Spa Marvel® Cleanser application directions

Spa Marvel® Cleanser application directions
Spa Marvel® Cleanser is a fast acting proprietary cleanser that penetrates deep inside your spa's plumbing and equipment, removing organic, mineral and chemical contaminants. In brand new spas, Spa Marvel® Cleanser removes residues leftover from the manufacturing process.
  • Remove the spa filters.
  • Using the existing spa water, pour 1bottle of Spa Marvel® Cleanser into existing water. Run jets on high for at least one hour and then allow to circulate for 23 hours. If your tub circulates for 8 hours a day then it will be best if you allow the cleanser to work for 2 - 3 days. Drain, flush and clean the tub. Rinse thoroughly. Don't forget to rinse out the filter compartment and jets so any cleaner in the pipes and pumps is flushed out. Repeat before every drain and refill.
  • Do not use the spa during the cleansing process.
  • Clean both sides of the spa cover with soap and water. If the cover is cracked or torn, we recommend it be replaced. The inside of spa covers have been known to harbor mold and bacteria, all of which drip from condensation through the cover back into the spa water.
Step #2
Spa Marvel®Water Treatment application directions
  • Replace the filters with new or PROPERLY cleaned filters (using a product such as Spa Marvel® Filter Cleaner).
  • Refill the spa using our X10 KDF Water Filter to ensure you start out with the cleanest, best, chlorine-free water you can.
  • Bring the hot tub up to normal operating temperature.
  • Balance alkalinity (80-120) and then pH (7.2-8.2) if necessary.
  • Add one 16-ounce bottle of Spa Marvel® Water Treatment for up to 2000 litres (500 gallons) of spa water and heat to desired temperature.
  • set the pump so your spa water will circulate and filter a minimum of 6 hours per day, and even longer if possible.
  • You may notice a slight film on the walls of the hot tub a few days after you first use Spa Marvel. This is because Spa Marvel is positively charged and the hot tub has a negative charge. Simply wipe the sides of the hot tub with your hand or a sponge to break the bond. You may wish to do this a couple times, after which the walls will feel smooth and clean to the touch.
  • Properly clean the filters weekly or as needed using a product such as Spa Marvel® Filter Cleaner.
  • One bottle of Spa Marvel® lasts up to three months. When the water starts to lose its 'silky' feeling, or in 3 months, add another bottle of Spa Marvel® to the spa water.
  • We recommend draining and replacing the spa water at least once every year.
Spa Marvel® is not a sanitizer. The Spa Marvel Company Inc. recommends that you follow spa water treatment as per local regulatory agency guidelines and use sanitizer as required. Please be aware that you will probably use far less of your favourite sanitizer.

ENJOY Spa Marvel®, the lowest maintenance, completely natural, non-chemical, safe skin conditioning product made exclusively for the hot tub industry!

You've got questions?  Please call us at 1-866-251-7102
Calgary, High River area: 403-602-0166
email us at:
0 Item(s)
CDN$ 0.00